Our Masks are Designed, Made and Tested in Canada

Healthy Apparel Red Maple Leaf

Licensed by Health Canada


We hold a MDEL issued by Health Canada who sets requirements, enforces compliance and monitors safety. 

Health Canada

Medical Devices Estabslishment License 15095

ASTM F2100-19 Certified


Level 2 and 3

We are ASTM certified and that means our products not only comply, but pass rigorous, high-stress testing.

ISO​ 9001:2015 Certified

ISO 9001 is an international standard that sets criteria for quality management systems (QMS). That means we have and continue to demonstrate the ability to consistently provide products and service by our system standards. These standards are used to help ensure customer receive  constant, good-quality products and service.

Nose Bridge

Our superior nose bridge contours your cheeks creating a barrier to help combat fog, while keeping out airborne particles.

Bacterial and Particle Filtration Efficiency


Our masks start at ≥  98% efficiency


This is important because our mask's resistance to bacteria starts at 98% and only gets better. And its filtration of particles is a minimum of 98% and goes up.

Super Soft Fabric

Our materials not only have a super soft inner layer, but a soft cashmere look-and-feel outer layer.

Fluid Resistance

ASTM F2100-19 requires

Level 1 masks to resist droplets at 80 mmHg.

While Level 2 mask resists 50% more at 120 mmHg.

And Level 3 at 100% more at 160 mmHg.

Our masks start at 50% more resistant than a Level 1 mask and our Level 3 masks are 100% more resistant than Level 1. 

Ear Loops

Thicker, flatter and a tad longer ear loops to aid with ear discomfort and fatigue.

We have our ear loops on the front of our mask, so you don't have to worry about skin irritation.


Delta P Differential Pressure tests how easy it is for air to pass from the outside to the inside of the mask and vice versa. Our masks are < 6.0 mm H20.

3 Layer, 3-Ply Protection


Outside: Blocks Droplets

Middle: Filters Out Particles

Inner: Optimal Breathability